White-rodgers 1F85CA-0471 User Manual

Browse online or download User Manual for Control panel White-rodgers 1F85CA-0471. White Rodgers 1F85CA-0471 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1
Blue Universal Thermostat with
Automatic Heat/Cool Changeover Option
Single Stage, Multi-Stage or Heat Pump
Installation and Operating Instructions for Model:
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING
THIS CONTROL COULD CAUSE PERSONAL INJURY
AND/OR PROPERTY DAMAGE.
Save these instructions for future use!
APPLICATIONS
SPECIFICATIONS
Electrical Rating:
Battery Power .................................................... mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire ................................................... 20 to 30 VAC
Terminal Load ........................................................... 1.5 A per terminal, 2.5A maximum all terminals combined
Setpoint Range ......................................................... 45° to 90°F (7° to 32°C)
Differential (Single Stage) ......................................... Heat 0.6°F; Cool 1.2°F (adjustable)
Differential (Heat Pump) ........................................... Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient .................................................... 32° to +105°F (0° to +41°C)
Operating Humidity ................................................... 90% non-condensing max.
Shipping Temperature Range ................................... -40° to +150°F (-20° to +65°C)
Dimensions Thermostat ............................................ 4.0”H x 5.11”W x 1.3”D
www.white-rodgers.com
1F85CA-0471 Thermostat
Model Programming Choices
1F85CA-0471
5/1/1 Day 5/2 Day Non-Programmable
1F85-0471
5/1/1 Day 5/2 Day Non-Programmable
1F83-0471
Non-Programmable
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this product
may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any spilled
mercury and place in a sealed container. For proper disposal
of a product containing mercury or a sealed container. Refer
to www.white-rodgers.com for location to send product
containing mercury.
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
THERMOSTAT APPLICATION GUIDE
Description
Heat Pump (No Aux. or Emergency Heat) Yes
Heat Pump (with Aux. or Emergency Heat) Yes
Systems with up to 2 Stages Heat, 2 Stages Cool Yes
Heat Only Systems (with optional fan switch) Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces Yes
Cool Only Systems Yes
Gas or Oil Heat Yes
Electric Furnace
Ye s
Hydronic (Hot Water) Zone Heat – 2 Wires Yes
Hydronic (Hot Water) Zone Heat – 3 Wires Yes
Compressor with Comfort Alert II Module (1F85CA only) Yes
Index Page
Installation 2
Wiring Connections 2
Wiring Diagrams 3
Thermostat Quick Reference 4
Installer Confi guration Menu 5
Operating Your Thermostat 7
Programming 7
Troubleshooting 9
PART NO. 37-6920B
Replaces 37-6920A
0905
Page view 0
1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - SPECIFICATIONS

1Blue Universal Thermostat with Automatic Heat/Cool Changeover OptionSingle Stage, Multi-Stage or Heat PumpInstallation and Operating Instructions for

Page 2 - WIRING CONNECTIONS

10Comfort Alert CodesThe Comfort Alert diagnostics product monitors the air con-ditioning outdoor systems with single phase Copeland Scroll compressor

Page 4 - THERMOSTAT QUICK REFERENCE

www.white-rodgers.comHOMEOWNER HELP LINE: 1-800-284-2925White-Rodgers is a divisionof Emerson Electric Co.The Emerson logo is a trademark and service

Page 5 - INSTALLER/CONFIGURATION MENU

2INSTALLATIONThermostat installation and all components of the control system shall conform to Class II circuits per the NEC code.WARNING!Remove Old T

Page 6

3WIRING DIAGRAMSHeat Pump ConnectionsIf you do not have a heat pump system, refer to fi gures 4-6.Refer to equipment manufacturers’ instructions for sp

Page 7 - IMPORTANT!

4SetSaveMonth Call For ServiceChangeFilterSystem On 2SYSTEMCool O TimeHeat Emer AutoFANOn AutoRun SchedScheduleMenuP DateRunHoldHeat PumpTemp H

Page 8

5INSTALLER/CONFIGURATION MENUWith thermostat in Heat, Cool or Auto, in normal operation, press the Menu button for at least 5 seconds. The display wil

Page 9

6INSTALLER/CONFIGURATION MENU1) This control can be confi gured for: MS 2 – Multi-Stage System (no heat pump) HP 1 – Heat Pump with one stage of com

Page 10 - TROUBLESHOOTING

7OPERATING YOUR THERMOSTATChoose the Fan Setting (Auto or On)Press the FAN button to Auto or On.Fan Auto is the most commonly selected setting and run

Page 11

8The programmable thermostats are programmed with the energy saving settings shown in the table below for all days of the week. If this program suits

Page 12 - The Emerson logo is a

9TROUBLESHOOTINGReset OperationNote: When thermostat is reset, installer confi guration menu settings and programming will reset to factory settings.If

Related models: 1F85-0471

Comments to this Manuals

No comments