White-rodgers 1F95-1280 User Manual download pdf (Page 7)

14. Select °F or °C Readout – Changes the display readout

to Celsius or Fahrenheit as required.

15. Select Audio Prompting (Beeper) On or Off – Factory

default setting is b, On. If you wish to turn off the beeper

select OFF.

16. Select Daylight Saving Time Calculation – This feature

will allow the thermostat to calculate the DST automati-

cally and apply it to the Real Time Clock display. Default

is On.

17 & 18. Select Automatic Schedule – This feature allows

programming a “Comfort Temperature” into all program

periods with the Auto Schedule key. When Heat AS

(for Heat mode) or Cool AS (for Cool mode) is selected

On, the Auto Schedule feature is ready to be set. Off

indicates that the feature is not ready to be used or a

“Comfort Temperature" is already set. See Auto Schedule

in Programming section.

19. Select Cool Savings™: Cool Savings allows you to

select a temperature offset (from 1-6 degrees). When

the compressor runs for long periods, the thermostat will

internally slowly/gradually adjust the room temperature

display lower, subtracting a maximum of the number of

degrees you select.

This energy saving feature is based on the principal that

long compressor run times lower indoor humidity and

make a slightly higher temperature feel comfortable.

Cool Savings operates only when the compressor runs

20 minutes or longer, normally on the hottest summer

days. When Cool Savings is operating the thermostat will

ﬂ ash "Cool Savings" to indicate it is slowly adjusting the

display temperature lower.

20. Heat Temperature Limit Range – This feature adjusts

the highest setpoint temperature for heat. The default

setting is 99°F. It can be changed to a setting between

62°F and 98°F. Temperature Limit" icon will be displayed

to the left of your setpoint temperature when using this

feature. "Temperature Limit" icon will ﬂ ash if an attempt

is made to adjust the temperature beyond the range

selected.

21. Cool Temperature Limit Range – This feature adjusts

the lowest setpoint temperature for cool. The default

setting is 45°F. It can be changed to a setting between

46°F and 82°F. "Temperature Limit" icon will be dis-

played to the left of your setpoint temperature when using

this feature. "Temperature Limit" icon will ﬂ ash if an

attempt is made to adjust the temperature beyond the

range selected.

22. Keypad Lockout – This step allows you to select the

type of lockout or limited range security required. If no

lockout or limited range security is required, press

advance the menu.

Three security settings are available in this menu item.

Use the

or keys to select the lockout desired.

Lockout selections are:

"Keypad Lockout and L" = Total Lockout. Total Lockout

locks all keys.

"Keypad Lockout and P" = Partial Lockout. Partial Lock-

out allows only the

or keys to operate within your

set temperature limits.

"Temperature Limit/Keypad Lockout" prevents chang-

ing the temperature limits in the Conﬁ guration Menu.

After the type of lockout is selected, press

Keypad Lockout Combination Number Selection

Display will read "000" "Keypad Lockout".

Skip this step and continue through the remainder of the

conﬁ guration menu if you require an Air Filter Change

out indicator or Humidiﬁ er Pad Change out indicator by

pressing the

key to advance.

Return to this point when you are ready to start your

selected lock-out and continue by:

Pressing

or keys to select your keypad lockout

combination number. Note: "000" is not a valid combina-

tion choice.

Record the number you select for future use.

Press

to exit the menu. The security feature you select

will start in 10 seconds. The system key will remain active

for 10 seconds to allow setting Heat, Off, Cool or Auto.

To unlock the keypad, press Menu, then press Installer

Conﬁ g. Display will show "000" and keypad lock. Enter

the code used to lock the keypad and press

23 & 24. Select Fast Second Stage, ON or OFF – Selecting

FA ON forces additional heat stages to come on quickly

when

is used to raise the temperature a few degrees

above the room. Select this setting if you want the heat to

increase quickly when you manually raise the tempera-

ture.

Selecting FA OFF allows the thermostat to calculate an

optimal time to bring on additional stages of heat. When

the

is used to raise the setting above the room tem-

perature additional heat stages may come on very quickly

or very slowly (up to 30 minutes later) depending on

recent system performance. Select this setting if you do

not require the additional heat stages to come on quickly

when you manually raise the setting and want to allow the

thermostat to stage based on recent system performance.

The Fast Cool feature operates the cooling stages in the

same manner as Fast Heat, On or Off when the tempera-

ture is lowered below the room setting.

25. Select Remote Temperature Sensor – Allows one

wired remote temperature sensor (indoor, F145-1328, or

outdoor, F145-1378) be connected to it and indicates the

measured temperature in clock digits. This item allows

you to select the remote sensor and also conﬁ gure it as

indoor or outdoor temperature sensor. Factory default

is off. Select Remote On and Remote in (for indoor) or

Outdoor Remote.

Local Temperature Sensor Disable – This is applicable

only when indoor remote temperature sensor is enabled.

Factory default is On LS. You can make it Off LS if de-

sired by using

or touch keys. Then, only the indoor

remote temperature reading will be used for control.

26. Select Dual Fuel Feature With No Outdoor Sensor

(dF) – This feature is applicable only in heat pump modes

and with no outdoor sensor. When selected ON, the

thermostat will use software logic to determine when to

switch to gas heat and shut down the compressor.

INSTALLER/CONFIGURATION MENU

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

White-rodgers 1F95-1280 User Manual Page 7

Comments to this Manuals

Related products and manuals for Control panel White-rodgers 1F95-1280