White-rodgers 1F80-240 User Manual download pdf (Page 6)

Enter Heating Program

1. Move the SYSTEM switch to HEAT.

2. Press PRGM once. “MO TU WE TH FR” (indicating weekday

program) will appear in the display. Also displayed are the

currently programmed start time for the 1st heating period

and the currently programmed temperature (flashing).

EXAMPLE:

MO TU WE TH FR

This display window shows that for the 1st weekday period, the

start time is 6:00 AM, and 68° is the programmed tempera-

ture (this example reflects factory preprogramming).

3. Press or to change the displayed temperature to

your selected temperature for the 1st heating program

period.

4. Press TIME once (the programmed time will flash). Press

or until your selected time appears. The time will

change in 15 minute increments. When your selected time

is displayed, press TIME again to return to the change

temperature mode.

5. Press PRGM once. The currently programmed start time

and setpoint temperature for the 2nd heating program

period will appear.

6. Repeat steps 3 and 4 to select the start time and heating

temperature for the 2nd heating program period.

7. Repeat steps 3 through 5 for the 3rd and 4th heating

program periods. Weekday heating programs are now com-

plete.

8. Press PRGM once. “SA” (indicating Saturday program) will

appear in the display, along with the start time for the 1st

heating period and the currently programmed temperature.

9. Repeat steps 3 through 7 to complete Saturday heating

programming.

8. Press PRGM once. “SU” (indicating Sunday program) will

appear in the display. Repeat steps 3 through 7 to complete

Saturday heating programming.

10.When you have completed entering your heating program,

press RUN.

Planning Your Program

Look at the factory preprogrammed times and temperatures

shown in the sample schedule. If this program will suit your

needs, simply press the RUN button to begin running the factory

preset program.

If you want to change the preprogrammed times and tempera-

tures, follow these steps.

Determine the time periods and temperatures for your weekday

and weekend programs. You must program four periods for

both the weekday and weekend program. However, you may

use the same heating temperatures for consecutive time peri-

ods. You can choose start times and heating temperatures

independently for both weekday and weekend programs (for

example, you may select 5:00 AM and 70° as the weekday 1st

period heating start time and temperature.

Use the following table to plan your program time periods and

the temperatures you want during each period. Fill in the

complete table to have a record of your programs.

Entering Your Program

Follow these steps to enter the heating program you have

selected.

Set Current Time and Day

1. Press TIME button once. The display will show the hour only.

EXAMPLE:

2. Press and hold either or until you reach the correct

hour and AM/PM designation (AM begins at midnight; PM

begins at noon).

3. Press TIME once. The display window will show the minutes

only.

EXAMPLE:

4. Press and hold either or until you reach the correct

minutes.

5. Press TIME once. The display will show the day of the week.

6. Press

or until you reach the current day of the week.

7. Press RUN once. The display will show the correct time and

room temperature alternately.

WEEKDAY (5 DAY) SATURDAY (1 DAY)

Start

Time Temperature

Start

Time Temperature

1ST

2ND

3RD

4TH

SAMPLE

Heating Schedule Plan (Factory Program)

Period

6:00 AM

8:00 AM

5:00 PM

10:00 PM

6:00 AM

8:00 AM

5:00 PM

10:00 PM

70 F

62 F

70 F

62 F

70 F

62 F

70 F

62 F

SUNDAY (1 DAY)

Start

Time Temperature

6:00 AM

8:00 AM

5:00 PM

10:00 PM

70 F

62 F

70 F

62 F

WEEKDAY (5 DAY) SATURDAY (1 DAY)

Start

Time Temperature

Start

Time Temperature

1ST

2ND

3RD

4TH

Heating Schedule Plan

Period

SUNDAY (1 DAY)

Start

Time Temperature

CHECK YOUR PROGRAMMING

Follow these steps to check your thermostat programming one

final time before beginning thermostat operation.

1. Move SYSTEM switch to HEAT position.

2. Press PRGM to view the 1st weekday heating period time

and temperature. Each time you press PRGM, the next

heating period time and temperature will be displayed in

sequence for weekday, then weekend program periods (you

may change any time or temperature during this procedure).

3. Press RUN to begin program operation.

YOUR THERMOSTAT IS NOW COMPLETELY PROGRAMMED AND

READY TO PROVIDE MAXIMUM COMFORT AND EFFICIENCY!

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

White-rodgers 1F80-240 User Manual Page 6

Comments to this Manuals

Related products and manuals for Control panel White-rodgers 1F80-240