White-rodgers 1F95W-80 User Manual download pdf (Page 12)

12

OPERATING FEATURES

Now that you are familiar with the thermostat

display and buttons, read the following informa-

tion to learn about the many features of the

thermostat.

• COMPUTED ENERGY MANAGEMENT

RECOVERY (EMR) — The thermostat’s

microcomputer automatically calculates the

time it will take to change the temperature to

the next program setting. Then the thermo-

stat will activate the heating or cooling sys-

tem to change the temperature so that the

desired temperature is reached at the be-

ginning of the next program period. As an

example of this feature, assume that you

have programmed your thermostat to pro-

vide an overnight heating temperature of

62°F, and that during the next program

period, beginning at 6:00 AM, you have

programmed a temperature of 70°F. The

thermostat will automatically activate the

heating system at about 5:00 AM, so that

the programmed 70°F temperature is

reached by about 6:00 AM.

This feature is enabled by option switch #3.

To enable the EMR function, you must

move option switch #3 (located on the back

of the thermostat body) to the ON position.

To do this, press

SYSTEM

HEAT - OFF - COOL - AUTO

until OFF is dis-

played on the thermostat. Remove the ther-

mostat body from the wall, turn it over, and

check the position of option switch #3. If the

switch is ON (up), simply put the thermostat

back on the wall and press

SYSTEM

HEAT - OFF - COOL - AUTO

until the

desired operating mode is displayed. If the

switch is OFF (down), use a pencil or small

screwdriver to move the switch to the ON

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments