White Rodgers 1F85RF-275 Installation Guide download pdf (Page 17)

PROGRAMMING

Enter Heating Program

1. Press the SYSTEM button to HEAT.

2. Press PRGM once. "MO TU WE TH FR" (indicating

weekday program) will appear in the display. Also dis-

played are the currently programmed start time for the

1st heating period and the currently programmed temp-

erature (flashing).

EXAMPLE:

This display window shows that for the 1st weekday

period, the start time is 6:00 AM and 70° is the program-

med temperature (this example reflects factory prepro-

gramming.

3. Press

or to change the displayed temperature

to your selected temperature for the 1st heating program

period.

4. Press TIME once (the programmed time will flash). Press

or until your selected time appears. The time

will change in 15 minute increments. When your selected

time is displayed, press TIME again to return to the

change temperature mode.

5. If both the local and the remote sensors are enabled, then

you may press HOLD button to change the remote sensor

Setting the Clock and Day

Set Current Time and Day

1. Press TIME button once. The display will show the hour

only.

EXAMPLE:

2. Press and hold either

or until you reach the

correct hour and AM/PM designation (AM begins at mid-

night; PM begins at noon). A will indicate for AM. P will

indicate for PM in the minutes digits.

3. Press TIME once again. The display window will show

the minutes only.

EXAMPLE:

4. Press and hold either

or until you reach the

correct minutes.

5. Press TIME once again. The display will show the day of

the week.

6. Press

or until you reach the current day of the

week.

7. Press RUN once. The display will show the correct time

and room temperature alternately.

This thermostat starts the programmed temperature earlier

than the time selected in your program. This allows the

system to reach your setting by the time you specify in your

program. This feature is called EMR (Energy Management

Recovery). If you do not want the thermostat to start early,

you may cancel the EMR feature in the Configuration Menu.

weighting setting. Remote icon will display. The pro-

grammed weight (A, HI or LO) will flash. Press

to change the displayed weight to your selected weight

for the 1st heat program period.

CHECK YOUR PROGRAMMING

Follow these steps to check your thermostat programming

one final time before beginning thermostat operation.

1. Press SYSTEM button to HEAT position.

2. Press PRGM to view the 1st weekday heating period

time and temperature. Each time you press PRGM, the

next heating period time and temperature will be display-

ed in sequence for weekday, then Saturday and Sunday

program periods (you may change any time or tempera-

ture during this procedure.

3. Press RUN.

4. Press SYSTEM button to COOL position.

5. Repeat step 2 to check cooling program.

6. Press SYSTEM button to HEAT or COOL and press

RUN to begin program operation.

YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO

PROVIDE MAXIMUM COMFORT AND EFFICIENCY!

6. Press PRGM once. The currently programmed start time

and setpoint temperature for the 2nd heating program

period will appear.

7. Repeat steps 3 and 5 to select the start time and heating

temperature for the 2nd heating program period.

8. Repeat steps 3 through 6 for the 3rd and 4th heating

program periods.

9. Press PRGM once "SA" (indicating Saturday program)

will appear in the display, along with the start time for the

1st heating period and the currently programmed temp-

erature.

10.Repeat steps 3 through 8 to complete Saturday heating

programming.

11.Press PRGM once to change to "SU" (Sunday) heating

programming and repeat steps 3 through 7 to complete

Sunday programming.

12.When you have completed entering your heating pro-

gram, press RUN.

Enter Cooling Program

1. Press SYSTEM button to COOL.

2. Follow Enter Heating Program for entering your cooling

program, using your selected cooling times and tempera-

tures.

CAUTION

If the outside temperature is below 50°F, disconnect

power to the cooling system before programming.

Energizing the air conditioner compressor during

cold weather may cause personal injury or property

damage.

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

White Rodgers 1F85RF-275 Installation Guide Page 17

Comments to this Manuals

Related products and manuals for Remote controls White Rodgers 1F85RF-275