White Rodgers 1F80-71 Owner's Manual download pdf

To prevent electrical shock and/or equipment damage

disconnect electric power to system at main fuse or

circuit breaker box until installation is complete.

Do not use on circuits exceeding specified voltage.

Higher voltage will damage control and could cause

shock or fire hazard.

Do not short out terminals on gas valve or primary

control to test. Short or incorrect wiring will damage

thermostat and could cause personal injury and/or

property damage.

Printed in U.S.A.

DESCRIPTION

1F80-71

Programmable Electronic

Digital Automatic Changeover Single Stage Thermostat

INSTALLATION AND

OPERATION INSTRUCTIONS

PART NO. 37-6120A

9934

Operator: Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY

BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE

PERSONAL INJURY AND/OR PROPERTY DAMAGE.

Your new White-Rodgers 5-Day/2-Day Single Stage Digital

Thermostat uses the technology of a solid-state microcomputer

to provide precise time/temperature control. This thermostat

offers you the flexibility to design heating and cooling programs

that fit your needs.

Features:

• Separate 5-day (weekday) and 2-day (weekend) programming

with four separate time/temperature periods per program

• Simultaneous heat and cool program storage

• Automatic changeover

• Optional C terminal (dual power option)

PRECAUTIONS

SPECIFICATIONS

• Optional Energy Management Recovery (EMR)

• Optional B and O terminals

• Preprogrammed temperature control

• LCD continuously displays set point, and alternately dis-

plays time and room temperature

• Temperature override until next program period

• Manual program override (HOLD temperature)

• °F/°C convertibility

• Temperature range 45° to 90°F

• Keypad lockout

• Armchair programming capability

This thermostat is intended for use with a 24-volt system; do not

use this thermostat with a millivolt or line voltage system. If in

doubt about whether your wiring is millivolt, line, or low voltage,

have it inspected by a qualified heating and air conditioning

contractor or electrician.

Do not exceed the specification ratings.

All wiring must conform to local and national electrical codes and

ordinances.

This control is a precision instrument, and should be handled

carefully. Rough handling or distorting components could cause

the control to malfunction.

ELECTRICAL DATA

Electrical Rating:

8 to 30 VAC 50/60 Hz. or D.C.

0.05 to 1.5 Amps (Load per terminal)

1.5 Amps Maximum Total Load (All terminals combined)

THERMAL DATA

Setpoint Temperature Range:

45°F to 90°F (7°C to 32°C)

Operating Ambient Temperature Range:

32°F to 105°F

Operating Humidity Range:

0 to 90% RH (non-condensing)

Shipping Temperature Range:

-40°F to 150°F

APPLICATIONS

For use with:

• Standard heat/cool or heat only systems

• Electric heat systems

• Gas or oil fired systems

• Gas systems with intermittent ignition devices (I.I.D.)

and/or vent dampers

• Hydronic (hot water or steam) systems

DO NOT USE WITH:

• Multi-stage systems

• Systems exceeding 30 VAC and 1.5 amps

• Millivolt systems

• 3-wire zoned hydronic heating systems

CAUTION

WARNING

WHITE-RODGERS DIVISION

EMERSON ELECTRIC CO.

9797 REAVIS ROAD

ST. LOUIS, MISSOURI 63123-5398

WHITE-RODGERS

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - WHITE-RODGERS

To prevent electrical shock and/or equipment damagedisconnect electric power to system at main fuse orcircuit breaker box until installation is comple

Page 2 - INSTALLATION

2INSTALLATIONREMOVE OLD THERMOSTAT1. Shut off electricity at the main fuse box until installation iscomplete. Ensure that electrical power is disconne

Page 3 - NOTE NOTE

3NOTE NOTEThe following wiring diagrams show typical terminal identifica-tion and wiring. For proper installation, refer to the originalmanufacturer&a

Page 4 - Cooling System

4CHECK THERMOSTAT OPERATIONIf at any time during testing, your system does not operateproperly, contact a qualified serviceperson.Fan Operation1. Turn

Page 5 - OPERATING FEATURES

5OPERATIONBefore you begin programming your thermostat, you should befamiliar with its features and with the display and the location andoperation of

Page 6 - PROGRAMMING YOUR THERMOSTAT

6• TEMPERATURE DISPLAY ADJUSTMENT — Your newthermostat has been accurately set in our factory. However,if you wish, you may adjust your new thermostat

Page 7 - MO TU WE TH FR

7EXAMPLE: MO TU WE TH FRThis display window shows that for the 1st weekday period,the start time is 6:00 AM, and 70° is the programmedtemperature (thi

Page 8

Comments to this Manuals

No comments

White Rodgers 1F80-71 Owner's Manual

Browse online or download Owner's Manual for Thermostats White Rodgers 1F80-71. White Rodgers 1F80-71 Owner's Manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Thermostats White Rodgers 1F80-71