White Rodgers 1F94-371 Specifications

Browse online or download Specifications for Thermostats White Rodgers 1F94-371. White Rodgers 1F94-371 Specifications User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
COMFORT-SET 90
®
SERIES
HEAT PUMP INSTALLATION/CONFIGURATION
This White-Rodgers Automatic Setback
Digital Thermostat uses microcomputer
technology to provide precise time and
1F94-371: 7 Day programming; residen-
tial applications
ELECTRICAL DATA
Electrical Rating:
20 to 30 VAC, 50/60 Hz with common
0.05 to 1.5 Amps per terminal
2.5 Amps maximum total load (all
terminals combined)
INSTALLATION
WHITE-RODGERS
Part No. 37-6186B
Replaces 37-6186A
0121
DESCRIPTION
SPECIFICATIONS
temperature control. This thermostat offers
the flexibility to design heating and cooling
programs that fit building needs. This
Standard Systems:
Single-stage or two-stage compressor
heat pump.
THERMAL DATA
Setpoint Temperature Range:
45° to 99°F (7° to 37°C)
Operating Ambient Temperature:
32° to 110°F (0° to 43°C)
Operating Humidity Range:
90% non-condensing max.
Shipping Temperature Range:
-4° to 149°F (-20° to 65°C)
PRECAUTIONS
Do not short out terminals on gas valve
or primary control to test. Short or
incorrect wiring will damage thermostat
and could cause personal injury and/or
property damage.
Do not use on circuits exceeding
specified voltage. Higher voltage will
damage thermostat and could cause
shock or fire hazard.
Thermostat installation and all compo-
nents of the system shall conform to
Class II circuits per the NEC code.
To prevent electrical shock and/or
equipment damage, disconnect electric
power to system at main fuse or circuit
breaker box until installation is
complete.
Read all instructions thoroughly before
beginning installation.
CAUTION
!
WARNING
!
This thermostat is intended for use with a
low voltage system. Do not use on a line
voltage system.
Do not exceed ratings shown in the Specifi-
cations section, above. If in doubt about the
electrical ratings of your heating/cooling
system, have it inspected by a qualified
heating and air conditioning contractor or
licensed electrician.
All wiring must conform to local and
national electrical codes and ordinances.
This control is a precision instrument, and
should be handled carefully. Rough handling
or distorting components could cause the
control to malfunction.
NOTE
thermostat is adaptable to most 24 volt
residential forced air heat pump systems with
electric or fossil fuel auxiliary.
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - COMFORT-SET 90

COMFORT-SET 90® SERIESHEAT PUMP INSTALLATION/CONFIGURATIONThis White-Rodgers Automatic SetbackDigital Thermostat uses microcomputertechnology to provi

Page 2 - INSTALLATION

2Figure 1. Thermostat base and terminalsRCRCEW2W1Y2Y1BOGPH D SASBSCOTL123415W3A1E2PATTENTION!This product does not contain mercury.However, this produ

Page 3 - HEAT PUMP TERMINAL OUTPUTS

3HEAT PUMP TERMINAL OUTPUTSRefer to equipment manufacturers’ instruc-tions for specific system wiring information.You can configure the thermostat for

Page 4 - CONFIGURATION

4RESET SWITCHSee the Troubleshooting section at the endof this document for more information aboutthe function of this switch.E2/P SWITCHThe E2/P swit

Page 5 - INSTALLER TABLE

5* NOTE: COMP LOCK OFF permanentlydefeats compressor lockout. You must turnthis selection ON if you do not have asystem that already provides compress

Page 6 - HEATING COOLING

6These numbers are approximate and represent operation with a typical system. Actualtemperature differentials and run times may vary widely based on y

Page 7 - CHECK THERMOSTAT OPERATION

7(Installer table step 16). If you wish to senseindoor temperature using ONLY the remotesensor(s), use this menu item to disable thetemperature sensor

Page 8 - TROUBLESHOOTING

WHITE-RODGERSEMERSON ELECTRIC CO.9797 REAVIS ROADST. LOUIS, MISSOURI 63123-5398www.white-rodgers.comTROUBLESHOOTINGRESET BUTTONIf the thermostat does

Comments to this Manuals

No comments